The
crawler mobile crushing plant can be divided into four series: screen head crushing, secondary crushing, tertiary crushing and screening. The head crusher is mainly jaw crusher and
hammer crusher, which is mainly used to process large materials above 30 cm. The second crusher is used to process medium-sized materials up to 30 cm. The main crusher is mainly cone crusher and anti-crusher. The main engine used for sand making or processing fine aggregate is mainly short head cone crusher, three-cavity reverse impact crusher and sand making machine. The screening station is a stand-alone series. The number and size of screens are selected according to the type of user and output.
1. Advantages of crawler mobile crushing plant
(1) The transportation is convenient, it can walk on its own, it is easy to trailer, and there is no need to increase the concrete foundation.
(2) Integrated process equipment such as material receiving, crushing and conveying. By optimizing the process, it has excellent crushing performance for rock crushing, aggregate production and open pit mining. It can be combined into a line by different models. A powerful crushing line allows for multi-demand processing operations.
(3) Fuel saving, fuel saving rate up to 25%.
(4) Climbing operations can be carried out to meet the crushing requirements of mines, hydropower stations, coal mines and other projects.
2. Installation and maintenance of crawler mobile crushing plant
1. Installation of
crawler mobile crushing plant equipment
(1) After installation, check whether the bolts of all parts are loose and whether the main engine hatch is tight. If so, tighten it.
(2) Configure the power cord and control switch according to the power supply of the equipment.
(3) After the inspection, the no-load test run is carried out, and the test run can be carried out normally.
2. Maintenance of crawler mobile crushing plant
(1) Pay attention to check the wear degree of wearing parts, and replace wearing parts in time.
(2) If there is an impact sound during the rotation of the gear, stop the inspection immediately and eliminate it.
(3) Good lubrication has a lot to do with bearing life. It directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and well sealed. The main oiling positions of this machine are rotating bearings, roller bearings, all gears, movable bearings, sliding planes.
(4) If the temperature of the bearing oil rises, the reason for stopping the inspection immediately should be eliminated.
(5) Newly installed wheels are prone to loosening and must be checked frequently.
(6) The plane of the movable movable chassis should be dusted to prevent the movable bearings from moving on the chassis when the machine encounters indestructible materials, which will lead to serious accidents.
Compared with various stationary crushing plants, the mobile crushing plant is like a mobile small and medium-sized crushing plant, which has the characteristics of advanced design, excellent performance, high production efficiency, convenient use and maintenance, economic operating cost, and stable and reliable work.
