
Applications: Non-metallic mineral powder production, building materials, chemical processing and limestone powder preparation for desulphurisation.
Materials: Limestone, calcite, dolomite, gypsum, barite, marble and talc. Suitability depends on material properties and the required powder specification.
| Model | Maximum Feed Size (mm) | Product Fineness (mm) | Capacity (t/h) | Main Motor Power (kW) | Fan Power (kW) | Classifier Power (kW) | Feeder Model | Feeder Power (kW) |
|---|---|---|---|---|---|---|---|---|
| DM7815 | <15 | 0.8 - 0.045 | 1 - 3 | 18.5 | 15 | 2.2 | GZ-1 | 0.06 |
| DM9517 | <25 | 0.8 - 0.045 | 2.5 - 6.5 | 37 | 37 | 5.5 | GZ-1 | 0.06 |
| DM4121 | <30 | 0.8 - 0.045 | 3.5 - 9 | 75 | 75 | 7.5 | GZ-3 | 0.2 |
| DM1380 | <35 | 0.8 - 0.045 | 4.5 - 13 | 90 | 110 | 22 | GZ-3 | 0.2 |
| DM1600 | <35 | 1.2 - 0.045 | 4.5 - 16 | 132 | 132 | 15 | GZ-3 | 0.2 |
| DM1750 | <40 | 1.2 - 0.045 | 8 - 25 | 160 | 200 | 30 | GZ-4 | 0.45 |
| DM1900 | <40 | 1.2 - 0.045 | 6 - 27 | 220 | 200 | 45 | 650 * 4 | 4 |
| DM2200 | <40 | 1.2 - 0.045 | 10 - 40 | 315 | 280 | 45 | 650 * 4 | 4 |
Values apply to the listed model and configuration. Consider feed size, product fineness and capacity together. Material properties and operating conditions must be confirmed for final selection.
Material is ground between the rollers and grinding ring. The system combines grinding with air classification and powder collection.
The classifier separates qualified powder from oversized particles, which return to the grinding chamber for further grinding.
Pre-crushing, feeding, conveying, collection and dust-control equipment are selected for the feed material and site conditions.
Provide the exact model, nameplate information and relevant component dimensions when requesting rollers, rings or other replacement parts.
Send the raw material, available hardness and moisture data, maximum feed size, required powder fineness or grading, target capacity in t/h, project location and electrical supply. A material sample or test report is useful where available.
Maximum feed size describes the material entering the mill. Product fineness describes the powder leaving the grinding and classification process. The two columns represent different stages and should not be interchanged.
No. It is the overall range across the models listed on this page. Use the individual model row and confirm the material, feed conditions and target fineness before selecting equipment.
Quote the model exactly as shown on its nameplate or technical document, including the prefix and motor ratings. Include photos and component dimensions for replacement parts. A similar model name alone does not confirm an identical configuration.
These existing project profiles provide application context. Final selection for a new project depends on its own material and powder specification.





