Jaw crusher is an important member of the mine crusher production line, is the core equipment in the whole production line, and controls the development of the entire production line, so how to make the jaw crusher, an indispensable equipment in the stone production line, play an important role and create greater value.
Jaw crusher occupies an important position in the stone production line. If you want to make the
jaw crusher work better, you should avoid the following abnormal situations during operation and use to avoid damaging the machine and prolong its service life.
First of all, it is necessary to maintain the equipment regularly. In the process of using jaw crusher, due to the serious consumption of the machine, the screws of the internal parts of the machine or the screws holding the machine are often loose. This requires regular tightening of the machine's screws.
Secondly, the machine lubricating oil should be changed regularly. After a period of machine use, the internal lubricant will reduce the lubrication effect, and the debris that falls during the operation of the machine will be deposited in the lubricant, which will also increase the wear and tear of the machine. Therefore, when the lubricant has been used for a period of time, it must be replaced in time. After replacement, clean the inside thoroughly with kerosene to avoid residue. In this way, the machine is not prone to wear and tear.
Thirdly, the temperature inside the machine is too high.
Jaw crusher generates a lot of heat due to friction during use. If the heat cannot be dissipated in time and heat accumulates in the machine, the machine will be damaged. For example, the central shaft of a machine can be deformed by high temperatures and can damage it when crushing stone. Therefore, when using the crusher, it is essential to pay attention to the internal temperature at all times. If the temperature of the machine is too high, stop working in time and use it when the temperature drops.
Fourth, pick out the iron block first when adding raw materials. If there is a piece of iron in the raw material, the jaw of the jaw crusher will be damaged, which will make the machine unusable.
Fifth, if the particle size of the added material is not uniform. When too much raw material enters the machine, it can be damaged due to overload.
When working in the jaw crusher, it is necessary to comply with the content of the user manual and strictly maintain the machine, which can not only reduce energy consumption but also increase production.
